Fluke 434 User Manual download pdf (Page 98)

Fluke 433/434

Users Manual

19-4

the up/down arrow keys and ENTER. Then adjust the baudrate with the left/right arrow

keys and leave the menu with F5 - BACK. Baudrate and COM port number in FlukeView

must be adjusted correctly.

Figure 19-2. Analyzer and laptop PC

For correct communication with a printer it is necessary that baudrate and printer type of

Analyzer match with the hard copy device. The Analyzer baudrate and printer type are

adjustable as follows: press the SETUP key, then Function key F4 – USER PREFerence,

and then select Printer using the up/down arrow keys and ENTER. Then adjust the

baudrate with the left/right arrow keys, adjust the printer type with the up/down arrow

keys and confirm with ENTER. Leave the menu with F5 - BACK.

The figure below shows a typical setup with printer DPU-414 and printer adapter cable

PAC91. This setup requires an Analyzer baudrate of 9600 baud.

Figure 19-3. Analyzer, printer DPU-414, and printer adapter cable PAC91

Note

The Analyzer is adjustable to different baudrates for PC and printer.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 121 122

No comments

Fluke 434 User Manual Page 98