Fluke 434 User Manual download pdf (Page 82)

Fluke 433/434

Users Manual

18-4

Freq: adjustment of Nominal Frequency. Use the up/down arrow keys

to select 60 or 50 Hz. Press Function key F5 – OK to confirm.

Limits: see section Limits Settings.

Clamp, A range, V scale: adjustment of the Analyzer to the

characteristics of current clamps and voltage leads. The default

selection is valid for the accessories as supplied with the Analyzer. The

supplied voltage leads are 1:1 types; when using attenuating leads or a

voltage transformer you must adapt the voltage scale accordingly (e.g.

10:1 for 10 times attenuation). There are separate selection tables for

the Phases and Neutral: Function key F3 is used for selection.

F1 – LANGUAGE: use the up/down arrow keys to select the desired

information language. Press Function key F5 – OK to confirm.

F2 – VERSION & CAL: access to a read-only menu showing Model

Number, Serial Number, Calibration Number, Calibration Date, and a

survey of installed Options. The submenu under F1 is used to activate

options. Chapter 20 Tips and Maintenance explains how to do this.

F3 – FUNCTION PREF.: see section FUNCTION PREFerence.

F4 – USER PREF.: see section USER PREFerence.

F5 – BACK: return to last active measuring mode.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 121 122

No comments

Fluke 434 User Manual Page 82