search

Fluke 434 User Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 67
Fluke 433/434
Users Manual
16-2
1
23
4
5
A / L1
B / L2
C / L3
A / L1
B / L2
C / L3
A / L1
B / L2
C / L3
DIPS
INTERRUPTIONS
RAPID VOLTAGE CHANGES
SWEELS
UNBALANCE
FREQUENCY
PER PHASE
ALL PHASES
Figure 16-1. Power Quality Monitor Main Screen
The length of a bar increases if the related parameter is further away from its nominal
value. The bar turns from green to red if an allowed tolerance requirement is violated.
Use the left/right arrow keys to position the cursor on a particular bar and measuring data
belonging to that bar is displayed in the screen header.
Power Quality Monitoring is usually done during a long observation period. The function
is entered via the MONITOR key and a start menu to define immediate or timed start of
the measurement. Minimum duration of the measurement is 2 hours. An usual measuring
period is 1 week.
The Power Quality parameters RMS voltages, Harmonics, and Flicker have a bar for each
phase. From left to right these three bars are related to the phases A (L1), B (L2), and C
(L3).
The parameters Dips/Interruptions/Rapid Voltage Changes/Swells and
Balance/Frequency have a single bar for each parameter representing performance across
three phases.
Most of the Bar Graphs have a wide base indicating adjustable time related limits (for
instance 95 % of time within limit) and a narrow top indicating a fixed 100 % limit. If
one of both limits is violated, the related bar changes from green to red. Dotted horizontal
lines on the display indicate the 100% limit and the adjustable limit.
The meaning of the bar graphs with a wide base and a narrow top is explained below. By
way of example this is done for the RMS voltage. This voltage for instance has a nominal
value of 120 V with a tolerance of + and – 15% (tolerance range between 102 … 138 V).
The momentary RMS voltage is constantly monitored by the Analyzer. It calculates an
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 121 122

Comments to this Manuals

No comments
Related products and manuals for Acoustics Fluke 434
Acoustics Fluke PAC 91 User Manual   (2 pages)
  • Arista Networks SMC Networks Audiomedia Wharfedale Pro Mendocino
  • Compaq CD players Powermatic Lathes Sony Car speakers Pioneer Audio tuners Ciano Unknown
  • Dale Tiffany TA10874 Cobra PR 945 ASROCK Z97 Extreme6/ac Tripp Lite P568-050 Sharp AN-60KT
  • Philips HF3510-60 User Manual Toshiba NB200 User Manual Precor CLIMBER 835 User Manual Baldwin Laguna Towel Ring User Manual Axxess ASWC Installation Manual