Fluke Network Tester User Manual download pdf (Page 43)

Troubleshooting a Network Device

Verifying a Device’s Configuration

4-5

Tracking Protocols

Note

You can also view protocol information by

selecting Protocols from the Main menu.

To find out what protocols are associated with a device or

running on the network, do the following:

1. Display the Protocols screen (Figure 4-5):

afq20s.bmp

Figure 4-5. Protocols Screen

The Protocols screen lists groups of protocols

present on the network. This information can help you

find out if there are any protocol configuration

mismatches. See Table 3-1 for a list of the protocols

that NetTool can discover.

The network icon

appears

next to the name of

a protocol group to indicate that there are protocols of

that type running on the network. Note that some

protocols also display the PC icon

, which means

that NetTool sees them on both the PC and the

network sides.

2. To view detailed information for a particular protocol

group, move the cursor to its name, then press

SELECT.

For example, if you select IP Protocols, the IP

Protocols screen (Figure 4-6) is displayed:

ahn15s.bmp

Figure 4-6. IP Protocols Screen

All of the IP protocols NetTool sees are listed on this

screen.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 101 102

No comments

Fluke Network Tester User Manual Page 43