Fluke 56X User Manual download pdf (Page 30)

56x

Users Manual

Maintenance

Battery Charge

Use the battery charge symbols to gauge the approximate level of charge left on

the batteries.

Notes

When in low battery mode, the thermometer does not store values.

“Err” appears on the display if attempted.



Batteries are at 5 %. Before taking further readings, the batteries

must be changed.

Changing the Batteries

WWarning

Batteries contain hazardous chemicals that can cause burns or

explode. If exposure to chemicals occurs, clean with water and

get medical aid. To prevent injury and for safe operation and

maintenance:

• Remove all probes, test leads, and accessories before the

battery door is opened.

• Do not disassemble the battery.

• Repair the Product before use if the battery leaks.

• Remove batteries to prevent battery leakage and damage

to the Product if it is not used for an extended period.

• Be sure that the battery polarity is correct to prevent

battery leakage.

• Do not short the battery terminals together.

• Do not disassemble or crush battery cells and battery

packs.

• Do not keep cells or batteries in a container where the

terminals can be shorted.

• Do not put battery cells and battery packs near heat or fire.

Do not put in sunlight.

Note

The batteries should be replaced in less than one minute after

removal to avoid manually re-initializing the thermometer clock and

date.

To install or change the two AA batteries (see Figure 10):

1. Slide the locking tab on the battery door to the “unlock” position and then

open the handle.

2. Insert the batteries noting their correct polarity.

3. Close and lock the handle.

1 2 ... 25 26 27 28 29 30 31 32 33 34

No comments

Fluke 56X User Manual Page 30