Fluke 2635A-PRINT 120 User Manual download pdf

2635A-PRINT 120

2635A-PRINT 230

Serial 80 Column Dot-Matrix Printers

Instruction Sheet

Introduction

The 2635A-PRINT 120 and 2635A-PRINT 230 Serial

Printers (hereafter referred to as “the Printer”) are 80-

Column Dot-Matrix Serial Printers that can be

connected directly to the Fluke Hydra Series (2635A,

2625A, and 2620A models hereafter referred to as

“the Hydra”) to provide printed hard-copy output

without the need for a computer or software. The

Printer is shown in Figure 1.

Platen Knob

Power

Switch

Paper Separator

Bail Arm

Lever

Paper

Lever

egv001.eps

Figure 1. 2635A-PRINT Printer

Shipping Contents

The Printer comes with the following items:

• Instructions for Printer setup and use (this sheet)

• Quick Start Guide

• Platen knob

• Ribbon cartridge

• Paper separator

• CD-ROM with User’s Guide and print drivers

• Fluke RS42 serial printer cable

Installation

XWWarning

To avoid possible electric shock or

personal injury:

• Verify that the line voltage marked

on the back of the printer matches

the local mains supply before

connection.

• Check that the voltage listed on

the rating plate, located on the

back of the printer, matches the

local mains supply voltage before

applying power.

Some Printer parts have been removed for shipping.

Reassemble its detached parts, as follows (see

Figure 1 and the Quick Setup Guide for details):

1. Install the platen knob on the shaft on the right-

side of the Printer, lining up the slot in the knob

with the pin on the shaft.

2. Remove shipping tape from the Printer, and open

the top cover.

3. The print head is held to one side by a plastic

shipping retainer. Remove the retainer. Save the

retainer in case the Printer ever needs to be

shipped.

4. Center the print head by gently pushing it to the

center of the platen area.

5. Attach the ribbon cartridge to the print head by

setting the front-end in place and carefully

snapping the ribbon down between the print head

and platen.

6. Attach the paper separator by slipping the hooks

on its front into the two slots on the top of the

Printer.

1 2 3 4

Summary of Contents

Page 1 - 2635A-PRINT 230

Page 2

2635A-PRINT 120, 2635A-PRINT 230 Instruction Sheet 2 Loading Printer Paper XWWarning If the printer has been recently used, the print head may still

Page 3 - Specifications

Serial 80 Column Dot-Matrix Printers Operation 3 7. Press the PRINT button on the Hydra if necessary to turn PRN on. • 2620A Data Acquisiti

Page 4 - Contacting Fluke

2635A-PRINT 120, 2635A-PRINT 230 Instruction Sheet 4 Environmental Temperature Operating Storage 41 to 104 °F (5 to 40 °C) -40 to 158 °

Related models: 2635A-PRINT 230

Comments to this Manuals

No comments

Fluke 2635A-PRINT 120 User Manual

Browse online or download User Manual for Printers Fluke 2635A-PRINT 120. Fluke 2635A-PRINT 120 User Manual

Summary of Contents

Related models: 2635A-PRINT 230

Comments to this Manuals