Fluke 561 User Manual download pdf (Page 21)

Infrared Thermometer

Maintenance

Changing the Battery

To install or change the two AA batteries, open the battery compartment and insert the batteries as shown

in Figure 2.

Cleaning the Lens

Blow off loose particles using clean compressed air. Carefully wipe the surface with a moist cotton swab.

The swab may be moistened with water.

Cleaning the Housing

Use soap and water on a damp sponge or soft cloth.

WCaution

To avoid damaging the Thermometer, do NOT submerge it in water.

Troubleshooting

Symptom Problem Action

--- (on display)

Target temperature is over or under

range

Select target within specifications

B Low battery Replace battery

Blank display Possible dead battery Check and/or replace battery

Laser does not work 1. Low or dead battery

2. Ambient temperature above 40 °C

(104 °F)

1. Replace battery

2. Use in area with lower ambient

temperature

CE Certification

The Thermometer conforms to the following standards:

• EN61326-1 EMC

• EN61010-1

• EN60825-1 Safety

Certification testing was conducted using a frequency range of 80 to 1000 MHz with the instrument in three

orientations.

1 2 ... 16 17 18 19 20 21 22

No comments

Fluke 561 User Manual Page 21