Fluke Welder PN 643657 User Manual

Model 16 English Instruction SheetPage 1®16Multimeter with TemperatureInstruction SheetP Read First: Safety InformationTo ensure that the meter is us

Model 16 English Instruction SheetPage 10MIN MAX with Elapsed TimeµFRecords the hours and minutes between when MIN MAX was enteredand the last high an

Model 16 English Instruction SheetPage 11Disabling the BeeperTo disable the beeper for all modes, hold down r for 2 seconds whileturning the meter on.

Model 16 English Instruction SheetPage 12MaintenanceClean the case with a damp cloth and detergent. Do not use abrasives orsolvents.Battery Replacemen

Model 16 English Instruction SheetPage 13SpecificationsAccuracy is specified for a period of one year after calibration, at 18°C to28°C (64°F to 82°F)

Model 16 English Instruction SheetPage 14Function Range Resolution Accuracy Burden Voltage(50 Hz to 400Hz)0 to 200 µA0.1 µA±(2% + 3 counts) <5 mV/µ

Model 16 English Instruction SheetPage 15MIN MAX Recording with Elapsed TimeElapsed Time Resolution Accuracy0 to 100 hours (99:59) 1 minute 0.3% typic

Model 16 English Instruction SheetPage 16LIMITED WARRANTY & LIMITATION OF LIABILITYEach Fluke product is warranted to be free from defects in mate

Model 16 English Instruction SheetPage 2SymbolsPress button.Press button to switch between modes.Double insulation.Manual ranging mode.ip14i.epsAutoma

Model 16 English Instruction SheetPage 3AC and DC VoltageAlso refer to V•Check.Volts AC Volts DCInput Impedance ≅5 MΩ Input Impedance ≅10 MΩ50 Hz to 4

Model 16 English Instruction SheetPage 4W V•CheckIf a dc or ac voltage greater than about 4.5V is present across the inputswhen the meter is set to R,

Model 16 English Instruction SheetPage 5Temperature80PK-1 Type K ThermocoupleProbeVentorPipe°C°F16MULTIMETEROFF600VCOMCAT +ATEMPERATUREV•Checkip19f.e

Model 16 English Instruction SheetPage 6Capacitance ETurn off circuit power; then disconnect and discharge the capacitor beforemeasuring capacitance.+

Model 16 English Instruction SheetPage 7Microamps µARange 0 to 200 µA16MULTIMETEROFF600VCOMCAT +ATEMPERATUREV•CheckFlamesensorprobeControlmoduleµA AC

Model 16 English Instruction SheetPage 8Diode Test GTurn off circuit power before testing. For best results diodesshould be measured out of circuit.Al

Model 16 English Instruction SheetPage 9MIN MAXµF(Records the lowest and highest measurements)V•Check, autoranging, and Battery Saver are disabled. P