Fluke Network Device MedTester 5000C User Manual

medTester 5000C Automated Biomedical Equipment Test System Field Upgrade Installation Instructions PN 2245628 April 2005  2005 Fluke Corporation,

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 8 4. Fold the case halves back together. Attach the top case to the bottom case with the nin

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 9 6. Run the computer in DOS mode (command prompt). Note If running Windows 95 or 98, with th

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 10 7. To install more than one module, repeat steps seven (7) through nine (9) for each modu

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 1 medTester 5000C Field Upgrade Installation Instructions These instructions tell you how to

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 2 NOTE: IMPORTANT When upgrading your 5000C firmware, all memory for test records and checkl

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 3 Module and Upgrade Parts Check that you have received the following parts with your module

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 4 To install modules that include an installation disk • an IBM-compatible personal compute

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 5 IC Removal and Installation Description There are two types of IC sockets which you may enc

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 6 IC Installation Procedure This section describes the procedure you can use to install ICs.

MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS 7 Install Integrated Circuits 1. For a medTester 5000C Firmware Upgrade, remove IC U20 and U